The TRIDENT® System

Simple on the Outside - Clever on the Inside

Ardyne

The TRIDENT® System

Simple on the Outside - Clever on the Inside

TRIDENT has been active in the field since summer 2017.  Read about some of the TRIDENT Systems's successes in the Case Studies at the bottom of this page, or use our Calculator tool to see the savings the TRIDENT system can bring to your cut and pull operation.

Trident

Industry challenge

Operators have no viable option but to use standard cutters and spears for casing recovery, wasting valuable rig time on multiple trips. This old, single-purpose equipment is not optimised for the subsea environment, offering only limited functionality and relying on the availability and competence of field service. Pressure to save money and deliver solutions for late life and end life projects has never been greater, but there has not been an easy answer.

ARDYNE SOLUTION

TRIDENT - a rotary driven, single-trip cut and pull system that incorporates several innovative trip saving features including an integral tension set packer and a hydraulically activated spear in conjunction with the ability to either run & set a bridge plug or dress a cement plug prior to commencing the cutting and recovery of the target casing.

Single Trip Cut & Pull
Simple Operation
Packer for Pressure test, and Annular Circulation
Single Trip Casing Recovery

TRIDENT can tag cement or set a bridge plug, cut, and recover casing to surface in a single trip. The system allows the elimination of multiple trips in and out of hole, saving significant rig time in single-cut operations, and even more where multiple cuts are required.

Simple on the Outside

TRIDENT was designed for simplicity of operation, with the aspiration of enabling other service contractors or the rig crew to perform simple casing recovery operations, reducing POB once fully trained.  The TRIDENT system is made up of three modules - the TRIDENT cutter, the TRIDENT anchor, and the TRIDENT tension set packer.

Clever on the Inside

TRIDENT has inbuilt extras including: cut verification capability; a swarf management system to avoid swarf entering sensitive well control equipment; a spear which sets in both 9-5/8” and 10-3/4” sizes for tapered casing; annulus circulation around the cut casing, and other features.

> 2
Trips potentially saved
15+
hours potentially saved
280+
connections
Contact Us

To benefit from original expertise, optimise your operations, cut costs and reclaim rig time, call us on +44 (0)1224 452600 or fill in the form below